Today was one of those days where life got in
the way of building an airplane. So there was not much accomplished except for making
sure the anti-servo ribs flanges were squared before riveting the ribs to the upper
skins of the left and right anti servo tabs.
Riveting the upper anti-servo skins to the anti-servo
tab’s ribs.
The only other thing I was able to get
accomplished today was riveting the control horns onto both anti-servo tabs.
Using the pneumatic rivet squeezer to squeeze
the rivets attaching
the control horns to the anti-servo tabs.
Control horns installed on left and right
anti-servo tabs.
